Product Drawing for a new Product!

Stato: Closed
Premio: $28
Proposte ricevute: 19
Vincitore: manpreetsingh009

Winner

Descrizione del concorso

Hello, I am working on creating a new product and I need a product drawing for my manufacturers. I have the concept and the details and just need someone who can turn this into an accurate product drawing.

Item: Metal Match

I have included a drawing of the item I would like made and a picture of the item that this is based off of.

Component 1 - Main base of the match. It will have two notches running vertically on the match where the magnesium strips will be attached with super glue. The bottom section will have threads on it and a hollow inside. The top hole will be threaded and then give way to a recess to hold the lighter fluid.

Component 2 - Threaded cap, also hollow on the inside - this will be to hold replacement parts for the match

Component 3 - this is the match itself. It is meant to be hollow on the inside with a metal flint that runs down the middle - on either side of the flint, there should be two small slots that the wick will slide into.

All of the specs in my drawing are preliminary and are not exact. This is to get a feel for size and shape of the item. If you need specifics - you can ask me anything!

Competenze consigliate

Winner

Pubblica un concorso simile

Feedback del Datore di Lavoro

“Excellent all-around. He was the winner of our contest and his work throughout the 3 week contest of improving and innovating is much appreciated. Would definitely hire again.”

InfiniteProducts, United States.

Bacheca pubblica per chiarimenti

manpreetsingh009
- 9 anni fa
Hello sir, can you please select the winner .
- 9 anni fa
kctcmadanpur
- 9 anni fa
Thanx for extending
- 9 anni fa
Titolare del Concorso
- 9 anni fa
We have extended this contest for 5 days!
- 9 anni fa
Titolare del Concorso
- 9 anni fa
One thing that we think may be most economical is to make the thread of the match head wider - even make the body of the match .8 or .9" in diameter, although as narrow as possible from .75" to larger. The match head (the knurled portion) would have to be redesigned. A slightly larger grip in both diameter and length.
- 9 anni fa
Titolare del Concorso
- 9 anni fa
We have just found an issue with our design. Currently, the internal volume is about 1/2 of what we want it to be in the main component. It is 1.6" deep currently and has about a .3" internal diameter. We can't have the thread at top be too much bigger because of the design, but we would like the internal hole to be larger (around .45"-.5"). If anyone can post a design that solves this problem, and that our machinist can follow through on - this will be very important in our final decision.

One option would be to have it open at the bottom (just above the threaded compartment) as a screw on/screw off portion that accesses the body of the match.

The other option would be to make the match slightly larger or wider. We look forward to your input
- 9 anni fa
1. jaco01
  - 9 anni fa
  Sir,
  what will be a material of the match? Is there possibility for an interference fit?
  - 9 anni fa
2. Titolare del Concorso
  - 9 anni fa
  I do not know! But I would love your input. The material of the match would be subject to change based on finding the most economical way to manufacture this as a solid core match. We will likely anodize or black oxide this at the end. We just want it to be a nice finish. (All of the current ones are made out of plastic, so any metal is a significant improvement)
  - 9 anni fa
jaco01
- 9 anni fa
Dear colleagues, on any drawing there is no any centerline, most parts are hardly to produce without multiaxis machines or something. Briefly, your drawings are not follow any technical standard. And scale 1.5:1 is also not standard. The standard scales are 1:1, 1:2, 1:5, 1:10.
Drear InfiniteProducts, if you need a good technical drawings and a producible parts feel free to contact us any time.
- 9 anni fa
Visualizza 1 altro messaggio
1. jaco01
  - 9 anni fa
  Its hard but you can find internal turning tool that can do it.
  - 9 anni fa
2. Titolare del Concorso
  - 9 anni fa
  Hi jaco01 - we appreciate your input. Do you have any input on the comment I just left on the main board?
  - 9 anni fa
jaco01
- 9 anni fa
I suggest to put tolerance on dimension 0.4" (Component 2) beacuase it can happend that you could not screw up component 2 to the end
- 9 anni fa
kctcmadanpur
- 9 anni fa
Please look at #2, thank you
- 9 anni fa
Titolare del Concorso
- 9 anni fa
It would be helpful if you look up 'Round Metal Matches' on google images or something. My goal is to redesign this made of solid metal, with two magnesium strikers instead of one and a screw on cap on the bottom where they could keep replacement wicks.
- 9 anni fa
venugopalgttc
- 9 anni fa
#1 Hi I am venu gopal and I am basically from mechanical design background. I am interested in your project and I am ok with money too. If you give clearance then i will start working on this project.
- 9 anni fa
1. Titolare del Concorso
  - 9 anni fa
  It would be helpful if you look up 'Round Metal Matches' on google images or something. My goal is to redesign this made of solid metal, with two magnesium strikers instead of one and a screw on cap on the bottom where they could keep replacement wicks.
  - 9 anni fa
prasanthdeva7
- 9 anni fa
Sir, I have a doubt. In Component 1, If the internal hole of length 1.6 in is created, it clashes with the hole of 3.4 inch Dia. Please Clarify.
- 9 anni fa