Filtro

Le mie ultime ricerche
Filtra per:
Budget
a
a
a
Tipo
Competenze
Lingue
    Stato del lavoro
    3,881 ansys lavori trovati, prezzi in EUR

    I am looking for a freelancer who can optimize the design of a small ma...optimize the design of a small marine impeller using cad software and or any CFD software; Caeses ANYSIS OpenFOAM software etc. . The key parameter that needs to be optimized is the efficiency of the impeller. I have the part on my desk so i can send the dimension et. I have Cases propeller software but i do not know how to use it. Requirements: - Experience in CFD optimization using OpenFOAM or Ansys or similar - Knowledge of marine impeller design - Ability to analyze and interpret CFD results - Understanding of fluid dynamics and flow behavior The target performance improvement percentage that I am aiming for is 10-20%. If you have the skills and experience required for this project, please submit your...

    €134 (Avg Bid)
    €134 Offerta media
    40 offerte

    Hello Your bid will be taken into consideration so do not change it Assist me in following: Downloading and running Ansys for material selection Do material selection (names of materials i have it and need to find it is detailes in software and compare it with other materials )

    €58 (Avg Bid)
    €58 Offerta media
    10 offerte
    ANSYS CFD Modeling Terminato left

    Looking for someone with experience using ANSYS CFD modeling, especially with air or water valves, in order to help me with a specific, dynamic simulation.

    €10 / hr (Avg Bid)
    €10 / hr Offerta media
    31 offerte

    I am looking for a freelancer who can perform a basic structural analysis using ANSYS. The ideal candidate will have experience in finite element analysis and be familiar with ANSYS software. The project requires a basic level of detail for the analysis.

    €6 - €51
    Sigillata
    €6 - €51
    16 offerte

    I'm looking for somebody with experience with finite element analysis (Ansys) to provide a moderate level of detail in their analysis report. I already have a model or design that needs to be analyzed, so all that's needed is a knowledgeable expert to come in and get the job done. The analysis must cover Structural, Thermal and Fluid Flow - precise specifications can be provided as needed. Ultimately, I'm looking for a comprehensive analysis of my model or design as working accurately and efficiently as possible.

    €396 (Avg Bid)
    €396 Offerta media
    34 offerte

    Looking for an expert in MATLAB and available at present Need to construct an analytical and numerical model using static equilibrium equations and finite element analysis based on Ansys or Abaqus packages and hand calculation supported by MATLAB code.

    €85 (Avg Bid)
    €85 Offerta media
    6 offerte

    Looking for an expert in MATLAB and available at present Need to construct an analytical and numerical model using static equilibrium equations and finite element analysis based on Ansys or Abaqus packages and hand calculation supported by MATLAB code.

    €86 (Avg Bid)
    €86 Offerta media
    22 offerte

    CES EDUPACK or Ansys material selection Do material selection

    €22 (Avg Bid)
    €22 Offerta media
    5 offerte
    FanBlade CFD Terminato left

    I am looking for a skilled freelancer who can assist me with a FanBlade CFD project. The main goal of this project is to optimize the design of the fan blades. Skills and Experience: - Proficiency in using ANSYS software for CFD analysis - Strong knowledge of fluid dynamics and aerodynamics - Experience in conducting CFD analysis for fan blades - Ability to interpret and analyze CFD results accurately The project should be completed within a timeframe of 1-2 weeks. If you have the necessary skills and expertise in CFD analysis and ANSYS software, please reach out to discuss further details.

    €176 / hr (Avg Bid)
    €176 / hr Offerta media
    9 offerte

    Project Description: Structural Optimization for a Simple Component in General Mechanical Engineering I am looking for an experienced freelancer who can help me solve a structural optimization problem for a simple component in the field of general mechanical engineering. The ideal candidate will have expertise in Ansys and be able to apply optimization techniques to improve the performance and efficiency of the component. Skills and Experience: - Proficiency in Ansys for structural optimization - Knowledge of optimization techniques and algorithms - Understanding of general mechanical engineering principles - Ability to analyze and interpret simulation results - Experience with designing and optimizing simple components - Strong problem-solving and critical thinking skills...

    €17 (Avg Bid)
    €17 Offerta media
    7 offerte
    ansys fluent Terminato left

    ...fluid flow analysis using ANSYS Fluent. The specific analysis that needs to be performed is for gas flow. Skills and Experience: - Proficiency in ANSYS Fluent and experience in conducting fluid flow simulations - Knowledge of gas flow behavior and its impact on the system being analyzed - Understanding of computational fluid dynamics (CFD) principles and techniques - Ability to set up and define the specific conditions and parameters for the simulation, including the geometry, boundary conditions, and initial conditions - Experience in analyzing and interpreting the results of the simulation, including velocity and pressure distributions, turbulence characteristics, and any other relevant parameters The project involves conducting a VAWT CFD analysis using ANSYS ...

    €152 (Avg Bid)
    €152 Offerta media
    30 offerte

    I will create a CFD model for prototype cluster wind turbine and run it with ANSYS Fluent

    €111 (Avg Bid)
    €111 Offerta media
    1 offerte

    Material selection using ansys needed Material selection using ansys needed

    €27 (Avg Bid)
    €27 Offerta media
    17 offerte

    Hello, I’m looking to hire someone for a project using Ansys Rigid Body Dynamics. The analysis I need performed is static analysis, and I have a CAD model ready for analysis. I am looking for an intermediate level of detail in the results of the analysis. The successful candidate should have extensive experience using Ansys capabilities and software, with the ability to efficiently and accurately troubleshoot any problems that arise. I am looking for someone who can work quickly and accurately to provide robust results for my project. If you are able to deliver high-quality, accurate results on time, please get in touch.

    €24 / hr (Avg Bid)
    €24 / hr Offerta media
    20 offerte

    Converge an Ansys model and teach me I am looking for a freelancer who can help me with the correction and convergence of an Ansys simulation. It is a static strucrural model, involving metals, thin walls and elastic materials. Skills and experience required: - Proficiency in Ansys, specifically in structural analysis - Strong problem-solving skills - Ability to explain complex concepts in a clear and concise manner - Patience and willingness to teach a beginner in Ansys

    €135 (Avg Bid)
    €135 Offerta media
    6 offerte

    I'm looking for someone to complete a FEA on an aircraft fuselage using Ansys Discovery. The specific type of analysis needed is structural analysis. I have some specific requirements and constraints in regards to the analysis, particularly boundary conditions. This project is critical to the success of our project and I am looking for a freelancer with experience in the written specified software and analysis processes. If you feel confident that you can meet this requirement, please let me know and I will provide you with further project details. Thank you for your interest!

    €310 (Avg Bid)
    €310 Offerta media
    28 offerte

    I am looking for an experienced engineering professional to perform simulations on a solar still system using ANSYS. The primary purpose of the simulations is to derive an optimal design for the system through analysis of heat transfer, fluid flow, and structural components. I expect the simulation to result in a designed that reaches the optimal performance of the system to be identified by the end of the project and am looking for a completion timeline of two months. The simulations should involve fluid flow analysis. Therefore, the ideal candidate should have an advanced understanding of thermal energy engineering principles, advanced ANSYS functions, and demonstrated experience running similarly complex models.

    €45 (Avg Bid)
    €45 Offerta media
    18 offerte
    Foundation Analysis Terminato left

    I am seeking an expert with Ansys software for assistance in performing a structural analysis of moderate complexity of foundation monopile. The analysis should involve assembly with multiple parts, making the project more complex than a basic single part model. Ideally, the expert should also be able to provide a detailed report of the analysis; however, I am open to discussing other options that may be available. If this is something you could assist with, please reach out and let me know how you can help with this project.

    €35 (Avg Bid)
    €35 Offerta media
    18 offerte

    Estamos dimensionando la ventilación de dos recintos industriales y necesitamos modelizar los flujos de aire mediante ANSYS Fluent o similar

    €2029 (Avg Bid)
    €2029 Offerta media
    10 offerte
    Ansys software -- 2 Terminato left

    I am seeking an expert with Ansys software for assistance in performing a structural analysis of moderate complexity of foundation monopile. The analysis should involve assembly with multiple parts, making the project more complex than a basic single part model. Ideally, the expert should also be able to provide a detailed report of the analysis; however, I am open to discussing other options that may be available. If this is something you could assist with, please reach out and let me know how you can help with this project.

    €34 (Avg Bid)
    €34 Offerta media
    16 offerte

    I am looking for a Freelancer to develop a structural analysis for my senior project using Ansys software. The type of analysis I need is a static analysis and I already have a model/drawing ready for analyzing. My deadline for this analysis is within a week. I’m hoping to find someone who can deliver the results accurately and efficiently. If you have experience in engineering and Ansys software, I would love to hear from you. Thank you for your interest.

    €137 (Avg Bid)
    €137 Offerta media
    38 offerte

    I am looking for a Freelancer to develop a structural analysis for my senior project using Ansys software. The type of analysis I need is a static analysis and I already have a model/drawing ready for analyzing. My deadline for this analysis is within a week. I’m hoping to find someone who can deliver the results accurately and efficiently. If you have experience in engineering and Ansys software, I would love to hear from you. Thank you for your interest.

    €119 (Avg Bid)
    €119 Offerta media
    12 offerte

    I'm looking for an experienced freelancer to help me with a project in Ansys workbench and Adam’s view both . Specifically, I need help with intermediate level analysis. I have time constraints for this project which is deadline is 30 November 2023 , . Any experience in meshing and/or optimization would be beneficial . If you think you have the expertise and knowledge to assist me with this project, then please reach out and let me know. I'm eager to get started!and as provided in the sketch below is a pump and in that pump the part which needs to be done these analysis is the piston and piston rod

    €197 (Avg Bid)
    €197 Offerta media
    24 offerte

    I am seeking a freelancer with expertise in computational fluid dynamics and proficiency in solving der...freelancer with expertise in computational fluid dynamics and proficiency in solving derivations. Additionally, the ideal candidate should be proficient in using Ansys software and have excellent report writing skills. Tasks: - Solving derivations - Utilizing Ansys software - Creating detailed reports Specific Area of Focus: - The report should be focused on a specific area of computational fluid dynamics (to be provided by the client) Number of Derivations: - Assistance is required with 1-3 derivations Ideal Skills and Experience: - Strong knowledge of computational fluid dynamics - Proficiency in solving derivations - Experience with Ansys software - Excelle...

    €104 (Avg Bid)
    €104 Offerta media
    19 offerte

    I am looking for someone to help with performing thermal fatigue analyses according to the details given in the joined paper. For this project, I need someone who is experienced using ANSYS software to analyze different parameters and materials according to the given information. I have access to the necessary software required for the project. The deadline for completion of this project is within one week. Prior experience in performing similar simulation and analysis projects is a plus.

    €74 (Avg Bid)
    €74 Offerta media
    10 offerte

    ...a freelancer who can help me with the correction and convergence of an Ansys simulation. It is a static strucrural model, involving metals, thin walls and elastic materials. I will provide the geometry which consists 3 parts, one of which repeats 26 times, and a non-converging Ansys model. Goal is to make it converge, teach me what I did wrong and suggest improvements. Skills and Experience: - Strong background in structural analysis using Ansys - Experience in troubleshooting simulations - Ability to review and analyze simulations for general issues - Knowledge of finite element analysis and simulation convergence techniques Project Details: - The project requires a freelancer to review and analyze an existing Ansys simulation for troubleshooting purposes...

    €129 (Avg Bid)
    €129 Offerta media
    20 offerte

    I am looking for an Ansys workbench expert with an experience in structural projects to edit an existing project and continue project is related to compsite slabs with steel sheets (concrete, steel sheets and reinforcing bars).

    €281 (Avg Bid)
    €281 Offerta media
    15 offerte
    ansys software Terminato left

    I am looking for help with an analysis project using ANSYS software. I have specifications for the model that I need analyzed, but do not have a ready model prepared. It's a big project and I do think that we have Catia model ready to go but we can talk about the details. I would like help analyze force/loading and validate theoretical calculations. Therefore, I am looking for someone experienced enough and can work fast with ANSYS software to successfully complete this task. It's quite in a rush to be honest. I think if you are very good with ansys should be done in maybe couple hrs. It's not for a company or anything very formal, nothing crazy advanced as long as you can do some basic / intermediate work with ANSYS it will be enough! Thanks!

    €13 (Avg Bid)
    €13 Offerta media
    17 offerte

    Looking for a person with good command in computational fluid dynamics and has a experience with Ansys software. Matlab and detailed report skills is also required.

    €41 (Avg Bid)
    €41 Offerta media
    1 offerte

    ...analysis using ANSYS for a project involving structural analysis. Model/Geometry Creation: - The freelancer should be able to assist in creating the model/geometry as I do not have a specific one in mind. - Expertise in creating complex models/geometry is preferred. Boundary Conditions: - The numerical analysis will require a combination of fixed and free boundary conditions. - The freelancer should have knowledge and experience in setting up and applying these boundary conditions in ANSYS. Skills and Experience: - Proficiency in ANSYS software is mandatory. - Strong background in numerical analysis and structural engineering. - Experience with creating and analyzing complex models/geometry. - Familiarity with setting up and applying fixed and free boundary con...

    €107 (Avg Bid)
    €107 Offerta media
    2 offerte

    Hello! I am looking for an experienced ANSYS tutor with knowledge in fluid dynamics. I am a beginner in ANSYS and would like to learn the basics of it. I don’t have a specific project in mind for which I am trying to learn the software, as I just want to gain more knowledge about it and become more meaningful with using it.I want to learn how to use ANSYS for UAV projects. If you have experience tutoring and knowledge of the software, I could use your help to learn. Thank you for considering!

    €12 / hr (Avg Bid)
    €12 / hr Offerta media
    15 offerte

    I am looking for an experienced freelancer to create a SolidWorks 3D Model for structural analysis in conjunction with ANSYS. The freelancer I am looking for must have knowledge in both SolidWorks and ANSYS, and must possess the skills to design a SolidWorks model for structural analysis. Upon completion, the freelancer must also be able to conduct a Structural Analysis in ANSYS on the SolidWorks model. Preference is given to those who have experience in structural analysis using ANSYS software. Proficiency with SolidWorks design will also be heavily considered. Attention to detail and proficiency in software is essential for the successful completion of this project.

    €80 (Avg Bid)
    €80 Offerta media
    24 offerte

    I am in need of an expert in computational fluid dynamics who is proficient in Ansys software, mathematics, derivation and report writing. The project involves fixing errors and bugs in existing work as well as making major improvements. Skills and Experience Needed: - Strong knowledge and experience in computational fluid dynamics - Proficiency in Ansys software and mathematics - Excellent report writing skills - Ability to fix errors and bugs in existing work - Experience in making major improvements to computational fluid dynamics projects Specific Requirements: - Fix errors and bugs in existing work - Optimize performance of the project - Enhance accuracy of the results Report Writing Expectations: - Comprehensive report including background research and analysis - De...

    €340 (Avg Bid)
    €340 Offerta media
    21 offerte
    need ansys CFD Terminato left

    I am looking for a freelancer who is experienced in Ansys CFD to perform a fluid flow analysis for my project. Specific Requirements: - Fluid flow analysis using Ansys CFD - In-depth analysis with detailed flow patterns, pressure, temperature, etc. Geometry/Model: - I can provide the necessary information for the analysis. Skills and Experience: - Strong proficiency in Ansys CFD - Expertise in fluid flow analysis - Ability to conduct in-depth analysis and provide detailed results If you have the necessary skills and experience in Ansys CFD and can deliver accurate and detailed results for a fluid flow analysis, please bid on this project.

    €78 (Avg Bid)
    €78 Offerta media
    17 offerte

    I am looking for a freelancer who can help me import an Abaqus mesh file into ANSYS Workbench. Here are the project details: File Format: The Abaqus mesh file is in .inp format. Availability of Abaqus mesh file: Yes, I have the Abaqus mesh file ready. ANSYS Workbench Version: I am using ANSYS 2021 for this project. Skills and Experience: - Proficiency in working with Abaqus mesh files and ANSYS Workbench. - Knowledge of the .inp file format. - Familiarity with importing and working with different file formats in ANSYS Workbench. - Experience in troubleshooting and resolving any compatibility issues between Abaqus and ANSYS Workbench. I want to import the Abaqus mesh file to the Ansys workbench for static structural (lattice structure)....

    €70 (Avg Bid)
    €70 Offerta media
    7 offerte

    Hi, a solid disk is embedded in a cylinder of fluid. the disk is moving with a velocity of 0.062m/sec. The model is a fluid-solid-system coupling model in ANSYS 2023R1 The model has an error that is shown in the picture attached. deliverables: 1. a fixed model that runs the system coupling without an error. 2. an explanation of what you did in order to fix this.

    €14 (Avg Bid)
    €14 Offerta media
    7 offerte

    Hi, a solid disk is embedded in a cylinder of fluid. the disk is moving with a velocity of 0.062m/sec. The model is a fluid-solid-system coupling model in ANSYS 2023R1 The model has an error that is shown in the picture attached. deliverables: 1. a fixed model that runs the system coupling without an error. 2. an explanation of what you did in order to fix this.

    €14 (Avg Bid)
    €14 Offerta media
    5 offerte

    ...analysis on collector plate geometries for a solar dryer project. The purpose of the analysis is to compare the performance of different collector plate geometries. Skills and Experience: - Proficiency in Ansys Fluent software for conducting the CDF analysis - Strong background in fluid dynamics and heat transfer - Experience in optimizing collector plate geometries for solar applications - Ability to suggest and propose collector plate geometries for analysis - Knowledge of solar energy systems and their components The freelancer will be responsible for: - Conducting the CDF analysis using Ansys Fluent software - Comparing the performance of different collector plate geometries - Providing recommendations and suggestions for optimal collector plate geometries - Generat...

    €176 (Avg Bid)
    €176 Offerta media
    10 offerte

    I am in need of a freelancer who is an expert in SolidWorks and Ansys for a project involving the design and simulation analysis of landing gear for aircraft. The project requires expertise in both the design and simulation analysis aspects, specifically for both the main and nose landing gear. There are no specific standards or requirements that the design and simulation analysis must meet, so the freelancer can use general industry standards.

    €966 (Avg Bid)
    €966 Offerta media
    37 offerte
    CFD freelancer Terminato left

    I am looking for an experienced CFD freelancer to assist me with a fluid flow analysis on ANSYS software. The analysis needs to be completed within a week. I am looking for someone with prior experience inCFD-related tasks who can complete the analysis accurately and efficiently. If you think you have the qualifications for this project, I’d love to hear from you.

    €289 (Avg Bid)
    €289 Offerta media
    26 offerte

    Estoy buscando un profesional independiente cualificado que me ayude con un proyecto personal que implique el desarrollo de software de simulación. Requisitos: - Que sepa usar ANSYS: Hable español Sea de Ecuador, México, Venezuela, Paraguar, Colombia El proyecto debe completarse en menos de 5 días.

    €173 (Avg Bid)
    €173 Offerta media
    6 offerte
    Ansys simulation Terminato left

    Hello Hye I am need to conduct an account ansys simulation for 3d curved diffuser. I am looking for a private tutor can online with me

    €232 - €696
    Urgente Sigillata
    €232 - €696
    17 offerte
    solidworks Terminato left

    Are you an experienced engineer in Solidworks? I'm looking for somebody who can help me with a project involving simulation analysis. I have a general idea of what I'm looking for, but need some guidance to make sure everything is set up correctly. In the end, I need a full report with supporting data and an...simulation analysis. I have a general idea of what I'm looking for, but need some guidance to make sure everything is set up correctly. In the end, I need a full report with supporting data and analysis that will clearly convey the results of the analysis. If this is something you'd be able to help me with, please let me know. basically I need modeling of spur gear on solid works and analysis of it on Ansys which involve load analysis on its teeth, bending ...

    €119 (Avg Bid)
    €119 Offerta media
    22 offerte

    Project Title: Ansys MOTORCAD Trainer(BLDC Hub Motor design 10hours) ONLY FROM INDIA Description: - I am looking for an experienced Ansys MOTORCAD trainer with advanced expertise in the software. - The purpose of the training is project-based learning, where I can gain hands-on experience and apply the knowledge to real-world projects. - I require 5-10 hours of training per week to ensure a thorough understanding of the software and its applications. - The ideal trainer should have a strong background in Ansys MOTORCAD and be able to provide practical examples and guidance. - Experience in teaching and providing project-based training is highly preferred. - The trainer should be able to tailor the training to my specific needs and goals. - Excellent communication ski...

    €121 (Avg Bid)
    €121 Offerta media
    3 offerte

    I am looking for a skilled engineer to perform a CFD analysis on an airfoil. The desired outcome of the analysis is to optimize the lift and drag coefficients of the airfoil. The analysis should be conducted using ANSYS software, as per the client's preference. The specific operating conditions for the airfoil during the simulation are subsonic flow. Ideal skills and experience for this project include: - Proficiency in CFD analysis using ANSYS software - Knowledge of airfoil aerodynamics and lift/drag coefficient optimization - Experience with subsonic flow simulations

    €110 (Avg Bid)
    €110 Offerta media
    38 offerte

    I am looking for a freelancer who can help us with performing a multiphase fluid simulation with Ansys. It is primarily a turbulent flow. The model to run the simulation will be given. Ideal Skills and Experience: - Proficiency in Ansys for fluid simulation. - Experience with multiphase flow simulations. - Strong understanding of fluid dynamics and computational fluid dynamics (CFD). - Attention to detail for achieving high precision and accuracy in the simulation results.

    €153 (Avg Bid)
    €153 Offerta media
    34 offerte

    ...can help me create a specific aircraft model and perform an acoustic simulation. If you have knowledge and experience in CAD, CFD, and Aerodynamics, I would love to hear from you! Specific Requirements for the Aircraft Model: - I have detailed specifications for the aircraft model that I will provide to the freelancer. Preferred Software/Tools: - Ideally, I would prefer a model that can work in Ansys Fluent (2D or 3D). However, I am open to other software options as well. Project Deadline: - Ideally, I would like the project to be completed within 3 months. However, I can be flexible with the deadline if needed. If you are interested in this project and have the necessary skills and experience, please contact me with your questions and offers. I am excited to discuss further ...

    €144 (Avg Bid)
    €144 Offerta media
    24 offerte

    Soldiworks model and ansys mesh file by 2020 version

    €148 (Avg Bid)
    €148 Offerta media
    1 offerte

    I am looking for a skilled CAD modeller to create a 3D model of an automotive suspension system. I have all the specific dimensions and specifications for the model. The final output I require is a 3D CAD model. i require all components and final assembly to be constructed in solidworks, must be able to open in 20...dimensions and specifications for the model. The final output I require is a 3D CAD model. i require all components and final assembly to be constructed in solidworks, must be able to open in 2022 version. i will provide drawing sheets for all necessary components. i need this task completed in around 24 hours. as a follow up job, i will need some FEA analysis done on the same assembly using ansys workbench, its up to the freelancer if they want to take up the foll...

    €84 (Avg Bid)
    €84 Offerta media
    28 offerte